dichtol AM Macro Spray

40,18 €

Article number #2570 Category: Tags: , ,

Description

dichtol AM Macro Spray is a ready-to-use impregnation system based on a special polymer formulation. By using the practical spray can, dichtol AM Macro Spray enables easy and reliable impregnation of leaky components. Large pores (from 0. 1 to 0. 5 mm) can be closed. This enables high pressure tightness, even with difficult object structures. In the case of locally known leaks, punctual impregnation ensures an efficient use of materials. Direct application on site also eliminates long waiting and delivery times.

Characteristics

  • Efficient material consumption
  • Temporary corrosion and transport protection
  • Drinking water and food tested
    (Institute of Hygiene Gelsenkirchen)

Typical applications

  • Capillary active deep impregnation of micropores, hair cracks and porosities
  • Specific series impregnation
  • Single impregnation (of large components)

 

Storage / Shelf life

Store in original, unopened container in a dry, cool and frost-free place (+5°C to +20°C). Shelf life 5 years.

Processing / Preparation

Dirt residues, foreign bodies, grease and other substances must be completely removed from the pores to be sealed. For this purpose we recommend the use of DIAMANT Cleaner #1417.

Application

The object or application temperature should not exceed 40°C, otherwise the penetration of the polymer cannot be guaranteed 100%.

Spray

apply sealant in 4 stages at intervals of about 1 minute and keep damp on the surface for at least 5 minutes. This allows dichtol to penetrate deep into the pores.

Curing

dichtol WFT Makro Spray physically dries in a few hours (approx. 1 hr. per mm wall thickness). Due to the fast drying of dichtol, it is possible to use the components again after a short time.

Technical data sheet for DIAMANT AM Macro Spray

Download

Safety data sheet for DIAMANT AM Macro Spray

Request MSDS