dichtol WFT Macro Spray is a ready-to-use impregnation system based on a special polymer formulation. By using the practical spray can, dichtol WFT Macro Spray enables a simple and reliable impregnation of leaky components. Large pores (from 0.1 to 0.5 mm) can be closed. This enables high pressure tightness, even in difficult object structures. In the case of locally known leaks, punctual impregnation ensures an efficient use of materials. Direct application on site also eliminates long waiting and delivery times.
Characteristics
Efficient material consumption
Temporary corrosion and transport protection
Drinking water and food tested
(Institute of Hygiene Gelsenkirchen)
Typical applications
Capillary active deep impregnation of micropores, hair cracks and porosities
Specific series impregnation
Single impregnation (of large components)
Storage / Shelf life
Store in original, unopened container in a dry, cool and frost-free place (+5°C to +20°C). Shelf life 5 years.
Processing / Preparation
Dirt residues, foreign bodies, grease and other substances must be completely removed from the pores to be sealed. For this purpose we recommend the use of DIAMANT Cleaner #1417.
Application
The object or application temperature should not exceed 40°C, otherwise the penetration of the polymer cannot be guaranteed 100%.
Spray
apply sealant in 4 stages at intervals of about 1 minute and keep damp on the surface for at least 5 minutes. This allows dichtol to penetrate deep into the pores.
Curing
dichtol WFT Makro Spray physically dries in a few hours (approx. 1 hr. per mm wall thickness). Due to the fast drying of dichtol, it is possible to use the components again after a short time.
Shipping options
Our payment and shipping partners
Contact
Do you have any questions? We will be happy to help you.
Would you like expert advice on which of our products is best suited for you? Then simply contact one of our service technicians! We will be happy to help you, whether you contact us by phone, fax or mail.