DWH 314 P is a high-viscosity two component adjustment and adhesive coating on epoxy-resin basis with aluminium fillers, designed for form- and forcefitting filling and gluing of joints on components, assemblies of different materials. Due to spatula- and molding techniques it is possible to even achieve precision in µm-range. When using a micro-thin layer of DIAMANT-parting agent on the counter surface DWH 314 P can be seperated from it. The result is an exact copy of the molded surface. A high-perision preperation of surfaces and the mechanical post-processing of the surfaces is not necessary. In modern production processing times and costs can be dramatically reduced.
Form- and force-fitting installation of guides in mechanical engineering
Adjusting coating for assemblies and elements of various materials.
Full-surface lining of mouldings and elements as a replacement for feed plates.
Load-bearing gap compensation on beams of portal milling and gantry systems
μm- precise fitting of bushes, centering and guide elements
Fixing and / or centering of bearing bushes according to high precision alignment
As filling and composite material in 3D printing + Additive Manufacturing
Very high accuracy, μm-accurate moulding
Very high compressive strenght
Extreme dimensional stability after curing
Excellent load transfer due to complete application of the contact surfaces
Temperature resitant up to +80 °C
Excellent damping properties thanks to the E-module ca. 8300 N/mm²
mineral-anthracite color after curing
High resistance against oils, cooling emulsions, mineral and synthetic coolants and lubricants and many other chemicals.
Please contact our technicians for questions about chemical resistance.
Storage / Shelf life
Store in original, unopened container in a dry, cool and frost-free place (+5°C to +20°C). Shelf life 2 years. Keep away from direct sunlight. Higher temperatures reduce the shelf life.
Preparation of the bonding surface
The surfaces to be coated should have a significant roughening to improve adhesion. The peak-to-valley height should be 0.5 mm (Rt = 500μm). The roughening can be produced, for example, with a cutter head with a large feed on a milling machine.surfaces must be clean, dry and free of grease and oil. For cleaning dirty surfaces we recommend DIAMANT Cleaner #1417 or DIAMANT Cleaning Spray #1534.Surfaces to which DWH should not adhere should be coated with Release Agent #1354 or Release Spray #1355.
To mix DWH 314 P, add Component B completely to the Component A container. Mix intensively with a drill and the DIAMANT mixing propeller (Prod. No. #0789) (max. 250 rpm for approx. 2 minutes). Scrape off any material adhering to the wall of the container with a spatula and add to the mixture. Mix again thoroughly. The deaeration described below also results in a final mixing.
Remove DWH 314 P from the container immediately after mixing and spread thinly, crosswise, on a clean sheet. By spreading, a further mixing effect is achieved, but in particular stirred-in air bubbles are broken up. furthermore, a part of the reaction heat is dissipated by spreading over the surface, whereby the processing time is secured.
Description of use
First apply DWH 314 P with a trowel as a thin adhesive layer firmly onto the adhesive primer.Further trowel the product on the roof with a small excess without trapping air.The excess quantity applied should displace the air when moulding the components and thus ensure bubble-free application.
Do you have any questions? We will be happy to help you.
Would you like expert advice on which of our products is best suited for you? Then simply contact one of our service technicians! We will be happy to help you, whether you contact us by phone, fax or mail.
Subscribe to our newsletter and receive product news directly by e-mail.