MM1018 SEAL

56,43 €

Article number #2108 Category:

Description

MM1018 P SEAL is a metal polymer for pressuretight joint sealing between two metal parts. MM1018 SEAL is used in conjunction with MM1018 injection applications in order to seal cavities and is fully compatible with MM1018 liquid.

  • High compressive strength
  • Corrosion and weather resistant
  • Dimensionally stable
  • Curing approx. 2.3h at 20 °C ambient temperature

Storage / Shelf life

Cool and frost-free between (+5°C to +20°C) without direct sunlight, shelf life for 24 months. Protect from direct sunlight. Higher temperatures reduce the shelf life.

Processing

MM1018 SEAL is supplied in a sealed 2-component cartridge and requires no manual mixing. Loosen the screw on the cartridge head and remove the cap. Insert the mixer and attach it.The finished cartridge is now inserted into the cartridge gun. Squeeze out material until a uniform grey colour is achieved. The first 5 cm of the squeezed material should not be used, as they may have been mixed incorrectly. Clean the tip of the mixing tube and start applying the material.To ensure sufficient pressure tightness for the MM1018 injection, MM1018 SEAL should be pressed into the gap at least 10mm. Note that curing of MM1018 SEAL is significantly influenced by the component temperature of the adjacent components. At a temperature of 20°C, the material is sufficiently firm after 3 hours to begin the injection. We recommend a strength test with a pointed object such as a screwdriver to ensure that the material is sufficiently hardened. Contact surfaces that are wetted with MM1018 SEAL must be cleaned of dirt and loose particles using de-oiled compressed air if possible. To ensure good adhesion of MM1018 SEAL, the holding surfaces must be degreased with DIAMANT Cleaner #1417.

Technical data sheet for DIAMANT SEAL

Download

Safety data sheet for DIAMANT SEAL

Request MSDS