moglice P500

from 66,42 €

Article number #0296 Category:

Description

moglice P500 is a medium-viscosity 2-component sliding surface. this is used for the production of guides, hydrostatic guides, sliding bearings and sliding surfaces. The precise moulding technology enables complex shapes and structures without mechanical processing with a precision in the µm range. In modern production technology, process times and costs can be reduced many times over. The material can be detached from the counter surface by using a micro-thin layer of Diamant release agent. The result is an exact copy of the workpiece surface.

Typical applications

  • Sliding coverings and guides in mechanical engineering
  • Slides for punching sliders with permanent lubrication
  • Sliding surfaces for surface air bearings on glass grinding machines
  • Slides for transport systems for electronic elements such as waivers, displays or photovoltaics
  • Guided guides for positioning at high speeds
  • Sliding surfaces in pressure cylinders
  • Sliding surfaces in lubrication-free actuators and clutch elements
  • Repairs of sliding surfaces

Characteristics

  • simple, medium-viscous application by injection technique
  • μm-precise molding
  • High dimensional stability
  • High resistance to cooling emulsions, mineral and synthetic lubricants and cutting agents
  • Anti-Sick-Slip Behavior
  • Emergency running characteristics
  • Excellent load transfer due to complete contact surfaces

Chemical resistance

For questions about chemical resistance please contact our technicians.

Storage / Shelf life

Store in original, unopened container in a dry, cool and frost-free place (+5°C to +20°C). Shelf life 18 months. Protect from direct sunlight. Higher temperatures reduce the shelf life.

Processing the adhesion surface

The guide surface to be coated is roughened to improve adhesion. The peak-to-valley height should be 0.5 mm (Rt-500 µm). The roughening can be produced with a cutter head with a large feed on a milling machine.

Mixing Procedure

To mix moglice P500, add component B completely to the component A container. Mix intensively with a drill and the DIAMANT mixing propeller (Prod. No. #0789) (max. 250 rpm for approx. 2 minutes). Scrape off any material adhering to the wall of the container with a spatula and add to the mixture. Mix again thoroughly.

Ventilate

moglice P500 should be transferred to a clean container in a long, thin, uninterrupted stream.

Description of use

Transfer moglice P500 into a 1K empty cartridge and inject with this through an inlet channel into the prepared, sealed cavity. To avoid the influence of air, fill the cavity from the deepest point.

Qualification and Service

To ensure the best possible quality as well as error-free application, we offer the following services:

Consultation by phone and/or at your site Site supervision and monitoring of the work on site Complete execution of the work by our experienced application technicians

 

Technical data sheet for DIAMANT P500

Download

Safety data sheet for DIAMANT P500

Request MSDS