ultrametal Alu Smart P

from 25,78 €

Article number #2469 Category:

Description

Ultrametal Alu Smart P is a high-quality two-component filled polymer material for repairing and material for repairing and touching up metals. The solvent-free epoxy resin system is highly resistant to chemicals and does not corrode. does not corrode. The product is bisphenol A free and available in cartridges.

Properties

  • Can be machined like metal: filing, milling, turning, drilling
  • Perfect metal character
  • No shrinkage, therefore ideal for use on large surfaces
  • Long pot life
  • High mechanical strength
  • Can be painted over
  • Mechanically workable

Typical applications

  • Coating of pumps, tanks and heat exchangers
  • Axle and shaft repairs
  • Maintenance and repair of all metal parts
  • Refurbishment projects

Accessories

  • Manual discharge device (discharge gun) (item no. #179)
  • Cleaner (item no. #1417)
  • Scraper (item no. #78)

Storage / Shelf life

Store in the original, unopened container in a dry, cool and frost-free place. Shelf life 18 months. Protect from direct sunlight. Higher temperatures reduce the shelf life.

Preparation/processing

Roughen bonding surfaces and clean with DIAMANT Cleaner. The surface must be free of grease, dry and clean.

Mixing

Use without mixing spiral:

-Squeeze out the required quantity from the cartridge and mix homogeneously in a separate container.

Use with mixing spiral:

-Discharge material over the mixing spiral and discard the first 2-3cm. Then start application.

Curing

The treated surfaces can be used for light loads after 18 hours. After 24 hours, the surface is fully cured and can be used for full loads.

Technical data sheet for DIAMANT Alu Smart P

Download

Safety data sheet for DIAMANT Alu Smart P

Request MSDS