ultrametal Steel Smart P

from 25,78 €

Article number #2466 Category:


Ultrametal Steel Smart P is a high-quality two-component filled polymer material polymer material for the repair and improvement of metals. The solvent-free epoxy resin system has high chemical resistance and does not corrode. and does not corrode. The product is bisphenol A free and available in cartridges available in cartridges.


  • Can be machined like metal: filing, milling, turning, drilling
  • Perfect metal character No shrinkage, therefore ideal for use on large surfaces
  • Long pot life
  • High mechanical strength
  • Can be painted over
  • Mechanically workable

Typical applications

  • Coating of pumps, tanks and heat exchangers
  • Axle and shaft repairs
  • Maintenance and repair of all metal parts
  • Refurbishment projects


  • Manual discharge device (discharge gun) (item no. #179)
  • Cleaner (item no. #1417)
  • Scraper (item no. #78)

Storage / Shelf life

Store in the original, unopened container in a dry, cool and frost-free place. Shelf life 18 months. Protect from direct sunlight. Higher temperatures reduce the shelf life.

Preparation / Processing

Roughen bonding surfaces and clean with DIAMANT Cleaner. The surface must be free of grease, dry and clean.


Use without mixing spiral: -Squeeze out the required quantity from the cartridge and mix homogeneously in a separate container. Use with mixing spiral: -Discharge material over the mixing spiral and discard the first 2-3cm. Then start application.


The treated surfaces can be used for light loads after 18 hours. After 24 hours the surface is fully cured and can be used for full loads.

Technical data sheet for DIAMANT Steel Smart P


Safety data sheet for DIAMANT Steel Smart P

Request MSDS