ultrametal Alu FL

from 41,99 €

Article number #2455 Category:


ultrametal Alu FL is a high-quality two-component polymer material made for the repair of metals. The solvent-free epoxy resin system has a high chemical resistance and does not corrode.


  • Workable like metal: filing,milling,turning,drilling
  • Perfect metal character due to up to 90% metal filing
  • No shrinkage, perfect for large surfaces
  • Long pot life
  • High mechanical strength
  • Chemical resistant

Typical application

  • Coatings of pumps,containers and heat exchangers
  • Axle and shaft reperation
  • Maintenance and Reparation of all metal parts
  • Restruction projects

Storage / durability

Store dry and frost-free in the unopened container. Durability 24 months. Avoid direct sunlight. Higher temperatures reduce the durability.


Adhesion surfaces have to be roughed and cleaned with DIAMANT cleaner. The surface has to be dry and clean.


Pour the hardening liquid (#2450) in the given mixing ratio onto the resin component (#2455A). Mix the components manual with the spatula or mechanical (Propeller-Mixer, at 125 U/Min. for 2 Min.) until the hardener is completely mixed with the viscous resin. Any material which is sticking to the bottom or sides of the container has to be mixed in with the rest of the mixture completely. The material should be used immediately after mixing



The treated surfaces can be used for light application after 18 hours. After 24 hours the surface is completely cured and is resilient completely.



Technical data sheet for DIAMANT Alu FL


Safety data sheet for DIAMANT Alu FL

Request MSDS