ultrametal steel P is a high-quality two-component polymer material made for the repair of metals. The solvent-free epoxy resin system has a high chemical resistance and does not corrode.
Workable like metal: filing,milling,turning,drilling
Perfect metal character due to up to 90% metal filing
No shrinkage, perfect for large surfaces
Long port life
High mechanical strength
Coatings of pumps,containers and heat exchangers
Axle and shaft reperation
Maintenance and Reparation of all metal parts
custody / durability
Store dry and frost-free in the unopened container. Durability 24 months. Avoid direct sunlight. Higher temperatures reduce the durability.
Adhesion surfaces have to be roughed and cleaned with DIAMANT cleaner. The surface has to be dry and clean.
Pour the hardening liquid (#2460) in the given mixing ratio onto the resin component (#2462A). Mix the components manual with the spatula or mechanical (Propeller-Mixer, at 125 U/Min. for 2 Min.) until the hardener is completely mixed with the viscous resin. Any material which is sticking to the bottom or sides of the container has to be mixed in with the rest of the mixture completely. The material should be used immediately after mixing.
The treated surfaces can be used for light application after 18 hours. After 24 hours the surface is completely cured and is resilient completely.
Instandsetzung eines Oldtimer Rücklichtes Porsche Carrera RS
Our payment and shipping partners
Do you have any questions? We will be happy to help you.
Would you like expert advice on which of our products is best suited for you? Then simply contact one of our service technicians! We will be happy to help you, whether you contact us by phone, fax or mail.