WFT Spray

Storage / Shelf life Store in the original, unopened container in a dry, cool and frost-free place (+5°C to +30°C). Shelf life 5 years. Processing / Preparation Dirt residues, foreign bodies, grease and other substances must be completely removed from the pores to be sealed. We recommend the use of DIAMANT Cleaner #1417 for this purpose. Application The object or application temperature should not exceed +40°C, otherwise the penetration behavior of the polymer may be reduced. Brushing & spraying Apply dichtol in 4 steps at intervals of approx. 1 minute and keep the surface moist for at least 5 minutes. Injecting & filling Inject dichtol into the area to be sealed (e.g. blind hole, threaded hole, cooling channel, etc.) and allow to react for at least 5 minutes. Then pour off excess material if necessary. Immersion Completely immerse the component to be treated in dichtol. After an exposure time of at least 5 minutes, remove the component and allow to drain well. Curing dichtol WFT hardens within a short time. Please refer to the table for the exact times. We differentiate the curing in three stages: Surface hardening = time from which the material is firm to the touch and can be moved Mechanical through-hardening = time from which the material can be worked mechanically Full curing = time from which the material has reached its full chemical resistance